Corner Protectors: Sizes & Specifications

Corner Protectors / Edge Protectors are made to order product. Various size configurations allow corner protectors to be custom fit to any need. There are three measurements that determine size: Leg length, Caliper, Board length.

EXAMPLE: 3 x 3 x .250 x 36”

LEG LENGTH

Is produced from four paper sizes 4,5,6 and 8 inch. The angle is formed with either equal or offset leg length. Popular size listed below.

Paper Size	Leg Length
4"	2"x 2" or 1.5"x 2.5"
5"	2.5"x 2.5" or 2"x 3"
6"	3"x 3" or 2"x 4"
8"	4"x4" or 3"x5"

CALIPER

Caliper or thickness is measured in thousands of an inch and range from.060 to .500. Custom calipers are available per request. Our Thirteen Standard Sizes are:

.080

.090

.100

.120

.140

.160

.180

.200

.225

.250

.275

.325

.400

BOARD LENGTH

Corner protectors are cut to order, any length between 2.5 inches and 16 feet can be ordered.

Specification of Product

Degree of Angle - 85 to 95
Caliper - Caliper .250 and Below - minus .010” plus .005”
Caliper Above .275 - minus .015” plus .005”
Leg length Tolerance - plus or minus 1/8”
Board length Tolerance - plus or minus 1/8”

Custom Piece Counts

We realize that there are times when one skid is too much, or exact quantities are required. We strive to remain flexible to your business needs by offering our CHAMPION SERVICE .

Champion Service

Less than pallet quantities available
Custom Piece Counts Available
Call for details

To Top